Troubleshooting – Kenmore 473.8592 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'^''-'-TROUBLESHOOTING '
Use the list below to help solve minor problems.
Whafs the problem?
Carpet cleaner won’t run
What to do
/ Make sure the carpet cleaner is plugged in firmly.
/ Check the fuse or breaker.
Low suction
/ Empty the recovery tank; it may be full and the
automatic shut-off engaged.
/ Make sure recovery tank lid is securely latched.
/ Make sure tool mode lever is in proper position.
/ Make sure recovery tank latches are properly
secured.
/ Make sure nozzle front is properly snapped in
place.
/ Clean recovery tank screen.
Cleaning solution won’t dispense
/ Make sure solution tank is securely in place.
/ Refill the solution tank if it is empty.
Brushes won’t rotate
/ Set Brush Speed Selector to ON.
/ Clean brush filter.
/ Make sure tool mode lever is in proper position.
Low suction in hose during tool use
/ Make sure recovery tank ltd is securely latched.
/ Make sure tool mode lever is in proper position.
/ Make sure recovery tank latches are properly
secured.
/ Make sure nozzle front is properly snapped in
place.
/ Clean recovery tank screen.
/ If suction is still not satisfactory after reviewing
this checklist and a clog in the hose is suspected,
take carpet cleaner to a Sears Service Center for
servicing.
26