beautypg.com

Operating'instructioms, Fill the solution tank – Kenmore 473.8592 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Position upholstery tool (P) over projection (Q)

^■^with brush facing the back of the upper handle

and snap into place.

■. ■■ OPERATING'INSTRUCTIOMS:

FILL THE SOLUTION TANK

Unplug carpet cleaner from electrical outlet,

jRemove solution tank (A) by pressing on solu-
^tion tank release latch (B) and lifting upward.

m

Turn tank upside down and unscrew cap (C).

©

Using the detergent cup (D) located behind

the solution tank, measure the proper amount

of detergent and pour detergent into tank. For car­

pet cleaning, measure two cupfuls (approx. 5 fl.

oz.). For upholstery cleaning, measure one cup­
ful (approx. 2-1/2 fl. oz.).

Fill tank with hot tap water. Replace cap, making

sure it is screwed on tightly. Return detergent cup,
flat side with lettering facing out, to cavity behind
solution tank. Replace tank on carpet cleaner by

positioning bottom first. Press on top of tank to

secure latch in place.

A

CAUTION: Detergents contain Anionic and
Non ionic Surfactants. Avoid contact with
the eyes and skin. In case of contact with

eyes, flush with cold water for 15 minutes. In case
of contact with skin, wash with water. If irritation
persists, call a physician. For Medical Information
(U.S.), call 1-800-752-7869.

12

This manual is related to the following products: