beautypg.com

Rootine'care- for your carpe, Clean the nozzle, Clean the brushes – Kenmore 473.8592 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

ROOTINE'CARE- FOR YOUR CARPE ' "

' ' '

'■

CLEAN THE NOZZLE

Unplug carpet cleaner from electrical outlet.

Remove solution and recovery tanks to prevent
possible leaks.

@Lift up on top of nozzle and slide off cleaner.

Wipe debris off nozzle and front of cleaner with a
damp cloth.

cleaner back, raising front of cleaner off

^“^floor. Slide nozzle up from bottom of cleaner.

Press on upper portion of nozzle until it snaps in
place.

CLEAN THE BRUSHES

Unplug carpet cleaner from electrical outlet.

Remove solution and recovery tanks to prevent
possible leaks.

Tilt cleaner back onto the floor, resting it on its side.

brush assembly firmly to remove.

Rinse brushes under running water. Shake brushes

to remove excess water.

^^Align posts on brush assembly (A) with slots in

cleaner (B).

Turn brushes slightly to align square post (C) with
square hole (D) in cleaner.

Press brush assembly firmly and snap in place.

22

This manual is related to the following products: