beautypg.com

Using toe tool, Transporting, Brush on/off selector – Kenmore 473.8592 User Manual

Page 16: Select tool, How to attach tool, After using tool

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

TRANSPORTING

move your carpet cleaner from room to

^^room, put handle in upright and locked position

and tilt carpet cleaner back on its wheels and push

forward.

BRUSH ON/OFF

SELECTOR

Your carpet cleaner has two agitator brush settings.

ON - for normal cleaning of carpets

OFF - for cleaning carpets when brushing is not

desired. (Such as when picking up liquid spills.)

^^^Slide selector button (A) to the desired setting
^""’^before turning unit on and cleaning.

• USING TOE TOOL"

SELECT TOOL

^J^Stair/upholstery nozzle has a built-in brush to
^■•^help provide the scrubbing action some spots

may need for removal.

HOW TO ATTACH TOOL

Disconnect carpet cleaner from electrical outlet.

Place handle in upright position and remove hose

from rack.

^^^Slide tool mode lever (A) to the right.

The handle must be in the upright position in

order for cleaning solution to get through the
hose.

Connect tool to hose by sliding it onto connec-

^■■^tor until the tab (B) locks it securely.

Using your thumb, push forward and up on the
lever (C) to remove tool as shown.

AFTER USING TOOL

When finished using the hose and tool, remove
water from the hose.

Turn carpet cleaner on and hold end of hose up for
several seconds. Do not press trigger.

Remove solution (top) tank. Squeeze and hold trig­

ger over sink or drain to remove remaining solution
from hose while the carpet cleaner is still on.

16

This manual is related to the following products: