Braeburn 5300 2H-2C User Manual - Manual

CONTENTS
1
2 QUICK REFERENCE
PROGRAMMING
USER SETTINGS
QUICK REFERENCE
1
3
4 ADDITIONAL OPERATION FEATURES
TROUBLESHOOTING
SYSTEM Button: Selects AUTO (Heat/Cool), COOL, OFF, HEAT
or EMER.
PROG Button: Program setup mode, selects setpoint time,
temperature and fan setting for each program.
HOLD Button: Enables extended hold, clears extended hold
or temporary override.
RETURN Button: Used to enter user settings and returns
thermostat to normal mode from program mode.
DAY/TIME Button: Selects hour, minute and day setting.
Selects program day in Program setting mode.
FAN Button: Selects AUTO, ON, CIRC (recirculate) and
PROG (program) modes.
RESET Button: Located on front of thermostat, will return
programming, clock, differential settings, filter check monitor,
adjustment limit from setpoint, keypad lock, temperature
hold, short cycle timer and recirculating fan to default
settings if previously programmed.
Button: Turns on backlight for 10 seconds.
Button: Increases setting (time, temperature, etc.). Scrolls between
option settings.
Button: Decreases setting (time, temperature, etc.). Scrolls between option settings.
1
1
2
3
4
5
6
7
8
9
10
Inside of model 5300 shown
8
9
7
1 6
2 3 4 5
10
MODEL
5300
© 2006 Braeburn Systems LLC • Patents Pending • All Rights Reserved. Pub. No. 5300-110-002
Premier Series
Universal Auto Changeover Thermostat
Up to 2 Heat / 2 Cool
Conventional and Heat Pump
USER
MANUAL
READ ALL INSTRUCTIONS
BEFORE PROCEEDING
Braeburn Systems LLC, as an Energy Star partner has determined that this product meets the Energy Star Guidelines developed by the
U.S. Environmental Protection Agency & the U.S. Department of Energy for maximum energy efficiency.
For more information on energy
savings, go to www.energystar.gov