Braeburn 5390 - Manual

®
5390 Remote Indoor Sensor
MODEL
USER MANUAL
READ ALL INSTRUCTIONS BEFORE PROCEEDING
The Braeburn 5390 Remote Indoor Sensor senses the
air temperature at a remote location and transmits the
information to the compatible Braeburn thermostat. The
Installer has the option of controlling the temperature
sensing with just the thermostat, just the remote sensor,
or combining the two.
WARNING!
Important Information
• Read this manual thoroughly prior to installing remote indoor sensor.
• Prior to finishing installation, refer to the Installation Guide and test
thermostat operation.
• This remote indoor sensor should only be used as described in this
manual. Any other use is not recommended and will void the warranty.
INSTALLATION
NOTE:
When installing the remote indoor sensor, be sure to locate
the remote indoor sensor approximately 4 to 5 feet above the floor in
accordance with applicable building codes. Make sure to install the
remote indoor sensor in a location that provides good airflow
characteristics, and avoid areas behind doors, near corners, air vents,
direct sunlight or near any heat generating device. Installation in
any of these areas could impact thermostat performance.