ALTANA Haze-Gard Plus Operating Instructions - Manual (Page 35)

Changing Fuses
CAUTION: Before changing a
fuse, switch off the instrument
and unplug it from the power
source.
CAUTION: For continued
protection against risk of fire
replace only with same type and
rating of fuse.
With a suitable tool (No. 2 screw-
driver), remove the fuse holder from
the fuse housing (on the left side of
the unit). Replace the defective fuse
with a new one. Use only the type of
fuse specified in the Technical
Specifications (Chapter 12). Now
reinsert the fuse holder so that the
mark points to the appropriate line
voltage.
Never use reconditioned fuses or
fuses of the wrong type or size.
The mark on the fuse housing must
coincide with the mark for the
appropriate line voltage on the line
voltage selector.