ALTANA Haze-Gard Plus Operating Instructions - Manual (Page 24)

When entering numbers:
statistic
on/off
result
on/off
delete all
delete last
Change
desired
decimal
place
Change
value
Explanation of Menu Items
#ALIBRATE Calls up the calibration
routine (Chapter 5).
Print Statistics: Sends the readings
in the current statistics memory to the
connected printer.
Print Online: Sends readings to the
connected printer as soon as they are
taken.
Continuous Mode: Performs
automatic, continuous repetition of
measurements (Chapter 8).
Language: Allows you to change
languages, using the cursor key.
The cursor position shows the
selected language.
Beeper: Sets the instrument to emit
a beep signal after a measurement is
completed.
Adjust Date: Allows you to use the
cursor keys to change the date.
Years before 1980 will not be
accepted.
Adjust Time: Allows you to use the
cursor keys to set the internal clock.
Display Contrast: Allows you to
adjust display contrast, using the left
and right cursor keys.
Change Calibration Value: Calls
up a submenu to change the saved
calibration values (Chapter 5).