ALTANA Micro-Haze Plus - Manual (Page 45)

44
The battery or the Change or recharge
rechargeable bat- the battery (chap. 4.1).
tery is discharged.
The capacity of the If applicable, transfer
memory in STATIS- the memory contents
TIC MODE is ex- to a PC and clear the
hausted (999 loca- memory (chapter 9.3).
tions).
The calibration was Put unit into the correct
started on the wrong holder and, if neces-
standard. sary, restart calibration
(chapter 7).
Inadequate light in- Repeat calibration. If a
tensity during cali- fault is detected, please
bration (lamp aging contact our Customer
or operator error). Service.
One of the elec- Please contact our
tronic components is customer service.
defective.
Lower limit of Hlog > 10 units min.
measuring range (chapter 10).
exceeded.
Lower limit of Gloss > 10 units min.
measuring range (chapter 10).
exceeded.
15 Error Messages
>>LOW BATTERY!<< >>LOW BATTERY!<< >>LOW BATTERY!<< >>LOW BATTERY!<< >>LOW BATTERY!<<
MEMORY OVERFLOW MEMORY OVERFLOW MEMORY OVERFLOW MEMORY OVERFLOW MEMORY OVERFLOW
-----> >> > >mode mode mode mode mode
WRONG HOLDER WRONG HOLDER WRONG HOLDER WRONG HOLDER WRONG HOLDER
CONTROL LAMP CONTROL LAMP CONTROL LAMP CONTROL LAMP CONTROL LAMP
UNIT UNIT UNIT UNIT UNIT
NEEDS SERVICE
NEEDS SERVICE NEEDS SERVICE NEEDS SERVICE NEEDS SERVICE
< 10 < 10 < 10 < 10 < 10
RANGE RANGE RANGE RANGE RANGE