ALTANA Micro-Haze Plus - Manual (Page 19)

18
Calibrating
Calibrate only with a clean standard!
Insert the unit into the holder (black standard)
and switch it on with the mode button.
Start calibration: press the operate button.
Continue with haze calibration:
push the unit into the holder with the
white standard.
Press the operate button.
Select measurement mode
Remove the instrument from the holder and
switch it on with the mode button.
To select the desired measurement mode,
press the mode button.
You can cycle through the modes by
repeatedly pressing the mode button.
The instrument automatically switches off
if no button is pressed within the holdtime.
(section 6.1).
5 Brief Description
CALIBRATION CALIBRATION CALIBRATION CALIBRATION CALIBRATION
GLOSS GLOSS GLOSS GLOSS GLOSS -----> >> > >operate operate operate operate operate
SAMPLE MODE SAMPLE MODE SAMPLE MODE SAMPLE MODE SAMPLE MODE
haze log. c.
haze log. c. haze log. c. haze log. c. haze log. c.
STATISTIC n=000 STATISTIC n=000 STATISTIC n=000 STATISTIC n=000 STATISTIC n=000
haze log. c.
haze log. c. haze log. c. haze log. c. haze log. c.
CLEAR MEMORY CLEAR MEMORY CLEAR MEMORY CLEAR MEMORY CLEAR MEMORY
-----> >> > >operate operate operate operate operate
HAZE CALIBRATION HAZE CALIBRATION HAZE CALIBRATION HAZE CALIBRATION HAZE CALIBRATION
change holder! change holder! change holder! change holder! change holder!
CALIBRATION CALIBRATION CALIBRATION CALIBRATION CALIBRATION
HAZE HAZE HAZE HAZE HAZE -----> >> > >operate operate operate operate operate