ALTANA Micro-Haze Plus - Manual (Page 34)

33
9.2 Deleting the Last
Measurement
If the last measurement of a statisti-
cal series is an incorrect measure-
ment this measurement can be
deleted. However, this has to be
done immediately after the meas-
urement! As soon as the unit swit-
ches itself off, all measurements
are retained in the memory.
Press the mode button until the
message DELETE LAST VALUE
appears in the display.
By pressing the operate button the
deletion is started and the message
STATISTIC is displayed.
The series of measurements can
be continued now.
Series of Measurements in Statistic Mode 9
Fig. 15: Deleting the last measured value
HA 83.4 n=004 HA 83.4 n=004 HA 83.4 n=004 HA 83.4 n=004 HA 83.4 n=004
20° 18.7
20° 18.7 20° 18.7 20° 18.7 20° 18.7
HA m=57.6 s=36.6 HA m=57.6 s=36.6 HA m=57.6 s=36.6 HA m=57.6 s=36.6 HA m=57.6 s=36.6
20° m=53.8 s=41.3
20° m=53.8 s=41.3 20° m=53.8 s=41.3 20° m=53.8 s=41.3 20° m=53.8 s=41.3
DELETE LAST DELETE LAST DELETE LAST DELETE LAST DELETE LAST
VALUE
VALUE VALUE VALUE VALUE -----> >> > >operate operate operate operate operate
STATISTIC n=003 STATISTIC n=003 STATISTIC n=003 STATISTIC n=003 STATISTIC n=003
haze log. c.
haze log. c. haze log. c. haze log. c. haze log. c.
mode
mode
operate
continue the series: operate