ALTANA Micro-Haze Plus - Manual (Page 35)

34
9.3 Clearing the Memory
If a new series of measurements is
to be started, the memory of the
unit must be cleared.
If necessary, check to see whether
the memory contents are supposed
to be printed or transferred to a PC.
To clear, press the mode button to
select the display CLEAR MEMORY
(fig. 16). The memory contents are
cleared by activating the operate
button and STATISTIC with n=000
appears in the display.
9 Series of Measurements in Statistic Mode
Fig. 16: Clearing the memory
HA 35.9 n=010 HA 35.9 n=010 HA 35.9 n=010 HA 35.9 n=010 HA 35.9 n=010
20° 86.2
20° 86.2 20° 86.2 20° 86.2 20° 86.2
HA m=35.3 s= 0.8 HA m=35.3 s= 0.8 HA m=35.3 s= 0.8 HA m=35.3 s= 0.8 HA m=35.3 s= 0.8
20°
20° 20° 20° 20° m=86.9 s= 0.6 m=86.9 s= 0.6 m=86.9 s= 0.6 m=86.9 s= 0.6 m=86.9 s= 0.6
DELETE LAST DELETE LAST DELETE LAST DELETE LAST DELETE LAST
VALUE
VALUE VALUE VALUE VALUE -----> >> > >operate operate operate operate operate
CLEAR MEMORY CLEAR MEMORY CLEAR MEMORY CLEAR MEMORY CLEAR MEMORY
-----> >> > >operate operate operate operate operate
STATISTIC n=000 STATISTIC n=000 STATISTIC n=000 STATISTIC n=000 STATISTIC n=000
haze log. c.
haze log. c. haze log. c. haze log. c. haze log. c.
mode
mode
mode
operate