A&D Weighing BM-20 - Manual (Page 29)

BM series 27
6.6.
Monitoring Clock and Environmental Sensors
In the weighing mode, the built-in clock and environmental sensors (temperature, humidity, air
pressure) can be monitored and temperature data can be output with the function settings.
Specifications Of The Environmental Sensors
Sensor Resolution Measurement range Applicable range
Temperature ±1.5 °C 5 °C to 40 °C
Humidity ±10 % 0 % to 100 %
Air pressure ±10 hPa 300 hPa to 1100 hPa
5 °C to 40 °C
Caution
The environmental sensors are built into the case. Therefore, these values are not in accordance
with the environmental condition.
Refer to " 17. Specifications" for operating condition of the product.
Operation
Press the SELECT key in the weighing
mode. The current time, date and sensor
values (temperature, humidity, air pressure)
are displayed for several seconds in order.
The balance returns to the weighing mode
automatically.
If pressing the SELECT key while
displaying current data, the display
proceeds to next data.
If pressing the CAL key while
displaying current data, the balance
returns to weighing mode.
Note
If adjusting the built-in clock, refer to " 10.7.Clock And Calendar Function".
If appending time and date to data output, refer to the [Time/Date output (5-td)] of
" 10.2.Details Of The Function Table".
If appending temperature data to the data output, refer to [Temperature output (5-tp)] of
" 10.2.Details Of The Function Table".
Humidity Air pressure
Temperature
Weighing mode
Time
5 seconds
Date
5 seconds
Environmental sensors
10 seconds
Weighing mode