Storing active units – A&D Weighing BM-20 User Manual
Page 19
BM series
17
5.2.
Storing Active Units
The units and modes can be selected and stored in the function table.
The sequence of displaying them can be arranged to fit the frequency of use.
The units stored are maintained in non-volatile memory, even if the AC adapter is removed.
1 Press and hold the
RANGE
key until
ba5fnc
of
the function table is displayed in the weighing mode,
then release the key.
2 Press
the
RANGE
key several times to display
Unit
.
3 Press
the
key to enter the unit selection mode.
4 Specify a unit or mode in the order to be displayed
using the following keys.
RANGE
key .........To display the units sequentially.
RE-ZERO
key ......To specify a unit or mode.
The indicator
appears when
the displayed unit or mode is specified.
Examples
Unit Display
Gram g
Milligram mg
Counting mode
PC
Percent mode
%
Density mode
DS
5 Press
the
key to store the units or modes.
The balance displays
end
and then displays the next
menu item of the function table.
6 Press
the
CAL
key to exit the function table.
Then the balance returns to the weighing mode with the
selected unit.
Specify the unit
Press and hold
Press several times
The indicator is
displayed at the
units specified.
Store them
Selection key
Examples