Panasonic KX-P4440 - Manual (Page 89)

4. Using Your Laser Printer
4.1 General Guidelines
By now you should be familiar with your Laser Printer. This chapter will
help make your system work together for you and it will point out the
items that you may have to review.
This chapter is designed as a guide to the steps needed to configure your
system. Before you proceed, we recommend that you have all the manuals
for your system, including software, since you will need them for refer­
ence.
The Panasonic Laser Printer is designed to work with virtually all com­
puters and off-the-shelf software. In order to make your printer work for
you, there are a few things you need to do.
These include configuring your:
computer
and...
printer
and...
software
D
Configuring your entire system is extremely important. If the system is
not configured correctly, then you may experience problems.
4.2 Configuring Your Computer
Configuring your computer is the starting point for setting up your system.
Some of the things you need to select are: monitor type, printer port and
interface output parameters. After you configure your computer, be sure
to write down the settings you have made. These will be used again when
configuring your printer and software.
If you need specific information on configuring your computer, we suggest
you refer to the user’s manual or contact the manufacturer or the place
of purchase.
Using Your Laser Printer 4-1