22 care and maintenance of your laser printer – Panasonic KX-P4440 User Manual

Page 116

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tighten the two green screws and re-install cleaning pad.

Re-install

developer

unit.

Re-install drum unit.

Close clamshell.

To resume printing, press the ON LINE key.

Notes:

• If stains appear on the back of printed paper after a paper jam is

cleared, it is recommended that you run several test prints. (Refer

to page 2-29 for test print.)

• After removing the jammed paper, open and close the printer once

to clear jam messages.

5.4 How to Adjust Print Density

Print density refers to the relative darkness of the print on the paper. The

print density dial is located on the left side of the printer.

Normal position is upright.

5-22 Care and Maintenance of Your Laser Printer