Evf, white cap and grip belt, Eyepiece, Removing the white cap – Panasonic NVG2E User Manual

Page 9: Eyepiece corrector

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EVF, White Cap and Grip Belt

Pulling out the EVF

When pulling out the EVF, do not hold it by the Eyecup.

Note:
•Keep the EVF in its fully extended position during shooting.
•Do not apply any pressure on the EVF except for pulling it out and

pushing it back in again.

•Be sure to retract the EVF after shooting.

Eyepiece

Removing the White Cap

To remove the White Cap, press the stoppers on both sides and
pull it off.

•Grasp the Handgrip.

•Adjust the length of the Grip Belt.
•Attach the White Cap to the Grip Belt.

Eyepiece Corrector

With this control the eyepiece can be adjusted to the eyesight.

Pull out the EVF to its fully extended position.

Turn the Movie Camera on.

Adjust the Eyepiece corrector until the indications in the EVF

are clearly visible.