Accessories, etc, Shoulder strap, Car battery cord – Panasonic NVG2E User Manual
Page 17: Note
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Accessories, etc.
Shoulder Strap
1 Pass the end of the Shoulder Strap through the slit
of
the
Shoulder Strap Holder on the upper part of the rear of the Movie
Camera.
2
Securely attach the end of the strap.
3
Attach the other end of the Shoulder Strap at the lower part of
the rear of the Movie Camera in the same way as mentioned
above.
Tripod Mount
Bottom side of the Movie Camera
a stable surface,
with its legs fully spread.
•To attach Video DC light (VZ-LDS15E; optional), the L-shaped
Shoe Adapter (VW-SK3E; optional) is necessary.
AC Adaptor
Car Battery Cord
1
Connect the Power Supply Cable from the DC Output Socket
on the AC Adaptor to the DC Input Socket on the Movie
Camera.
2
Connect to the Mains.
Note:
When a Battery Pack is attached to the AC Adaptor, the Movie
Camera cannot be supplied with power.
(optional)
1
Start the engine and insert the Car Battery Cord into the
cigarette lighter socket.
2
Connect the other end to the DC input Socket on the Movie
Camera.
Note:
•The Car Battery Cord can only be used with 12V DC negative-
grounded vehicles.
•Do not start the car engine while the Movie Camera is powered by
the car battery.
•With this connection, the Video Light (supplied) cannot be used.
-17-