Cover the lens with the white cap after shooting, Keep the system away from strong light, When the system is not being used – Panasonic NVG2E User Manual
Page 23: Cleaning the movie camera, For handgrip, For cassette adaptor, For ac adaptor, For battery pack, Ac adaptor, Handgrip
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cover the Lens with the White Cap after Shooting
Keep the System away from Strong light
Do not expose the System to strong light, because the heat from it
may cause deformation or other damage.
When the System Is Not Being Used
After removing the Video Cassette, turn the Movie Camera off and
detach the Battery Pack.
Never Place the System with the Cassette
Compartment Side Facing Down
Never use the System with the cassette compartment facing down
as this might cause uneven winding and slacking of the tape.
Cleaning the Movie Camera
Wipe the Movie Camera with a clean, dry cloth. Never use cleaning
fluid, or other chemicals.
•Clean the lens only with a blower brush (used for photo cameras)
or a special lens cleaning tissue (used for glasses and cameras).
For Handgrip
When using this Movie Camera for a long period, the grip portion
will get a little hot. However, this is normal and has no effect on the
operation.
For Cassette Adaptor
•Do not insert this Cassette Adaptor into a VTR and take it out
again without running the tape, because this could cause the tape
to get loose.
•When loading the cassette info the Cassette Adaptor, be careful
not to touch the tape directly. After use, take out the cassette from
the Cassette Adaptor.
• Never insert the Cassette Adaptor into a VTR without a video
cassette in it.
For AC Adaptor
•Do not place heavy objects on the unit.
•When unplugging the main cord or other connection cords, be
sure to grasp the plug, not the cord.
•When listening to a radio while the AC Adaptor is in operation, the
radio reception may be distorted. In this case, move the radio
away from the AC Adaptor.
For Battery Pack
Be sure to charge the Battery Pack before using it.
Pay attention to the following points to avoid danger.
•Do not throw the Battery Pack into fire.
• Do not short-circuit the poles of the connector.
• Do not disassemble or reconstruct the Battery Pack.
•Use only the supplied AC Adaptor to charge the Battery Pack.
Follow the instructions below to avoid damage to the Battery
Packs or reduction of their service life.
• Never subject the Battery Pack to strong shocks or drop it.
• Do not recharge a Battery Pack that is already fully charged.
•During operation of the System or during recharging, the Battery
Pack may become warm however this does not pose any
problem.
•The service life of a Battery Pack has its limits. If the operation
time of a Battery Pack in spite of normal recharging becomes so
short that its normal use for shooting is no longer possible, it
should be replaced with a new one.
The function of the Battery Pack is based on a chemical
reaction. Use it according to its characteristics.
•Charge the Battery Pack within a temperature range of
10°C-35°C. If charged at lower temperatures, the chemical
reaction cannot take place optimally, causing the performance of
the Battery Pack to deteriorate. At higher temperatures, the
Battery Pack cannot be charged completely.
•Store the Battery Pack in a cool and dry place. It exposed to high
temperatures for a long time, the battery life will be shortened and
the self-discharging process will be increased.
•Charge the Battery Pack before using it as self-discharging may
occur if it
has not been used
for a
long period of time.
•When not using the Battery Pack, remove it from the Movie
Camera or the AC Adaptor.
-23-