Panasonic NVG2E - Manual (Page 19)

Character Generator Handgrip
The use of the optional Character Generator makes it possible to
record titles, time, date and stopwatch while shooting.
Attaching
Use the Shoe Adaptor that is supplied with the Unit.
•Before attaching the Character Generator, turn the Movie
Camera off.
2 1
1
Character
Generator Socket
Attach the Shoe Adaptor and tighten the screw.
2 Attach the Character Generator to the Shoe Adaptor.
3 Insert the plug of the Character Generator Cord into the
Character Generator Socket.
• For the operation of the Character Generator, see the operating
instructions of the Character Generator.
Be sure to pull
the strap over
your wrist.
•This button also
functions as
Start/Stop Button.
VITC signals
This Movie Camera is designed for recording VITC signals
(Vertical Interval Time Code) from a VITC Generator which can be
mounted on top of the Movie Camera. Using VITC Editing
Controller System (optional), cassette tapes that have been
recorded with VITC signals can be edited conveniently with frame-
by-frame precision.
Note:
For actual editing, refer to the Operating Instructions of the VITC
Editing Controller System.
Editing Recorded Scenes into Finished Video Movies.
1 View the original tape to check the recorded content.
Attaching the VITC Generator
2 Locate the exact starting and ending points of all the scenes
that you want to edit into a finished movie onto another cassette
tape.
Make a log with descriptions as well as starting and ending
points of these scenes, and determine the order in which they
are to be
edited.
Perform the editing.
•Before attaching the VITC Generator, turn the Movie Camera off.
Character
Generator Socket
1 Attach the VITC Generator to the Light Shoe.
2 Insert the plug of the VITC Generator Cord into the Character
Generator Socket.
-19-