Focus, Continuous auto focus, Macro close-up – Panasonic NVG2E User Manual
Page 11: Focus •macro close-up
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Focus
Continuous Auto Focus
For Continuous Automatic Focus adjustment, turn the Movie
Camera on and set the CAMERAA/TR Selector Cover to
“CAMERA”.
•The focus will automatically be adjusted to the subject in the
centre of the EVF,
Macro Close-Up
1
Slide open the cover on the lens part and press the Focus
Button.
•The indication “MF” will appear in the EVF.
2
To zoom in on an object, press the “T” Zoom Button.
3
Adjust the focus with the Focus “+” or Button.
4
To zoom back from a subject to show more of it, press the “W”
Button.
•After putting the Movie Camera into the Recording Lock mode
or turning it off and then on again with the Operation Switch in
the Manual Focus mode, be sure to repeat operation steps 2
to 4.
For close-up shots of small objects or photos.
Practical Hint for Shooting
•To change the scale of the subject, change the distance from the
subject.
•As the depth of field is very small in macro shooting, even slight
camera movements can cause the subject to be out of focus.
Therefore, it is recommended to use a tripod,
•When shooting pictures in a photo album or a similar situation
with insufficient lighting, use a Video Light.
•When the “T” Power Zoom Control Button is pressed to zoom in
on a subject, the focus can be adjusted within a range of more
than 0.7 m from the subject.
Keep the “W" Power Zoom Control Button pressed.
•The focus will be adjusted up to a minimum distance of 5 mm
between lens and subject.
•After focusing all the way to the wide-angle position, the focus
can be adjusted simply by approaching the subject.
•The focus can be adjusted both in the Auto and Manual mode.
-11-