Assemble editing, Preparation, Operation – Panasonic NVG2E User Manual
Page 16: Dubbing (copying), Note, Synchro editing, For recording, Assemble editing •dubbing (copying), I do
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Assemble Editing
PAUSE STOP
PLAY
Э -
@/REW FF/®
i do
Preparation
• Insert a video cassette with intact erasure prevention tab.
•Set the CAMERA/VTR Selector Cover to “VTR”.
Operation
1
Play back the tape to locate the point where the new recording
is to be joined (Assemble Editing), and press the Pause Button
at the desired point.
2
Set the CAMERA/VTR Selector Cover to “CAMERA”.
3
Press the Start/Stop Button to start shooting the new scene.
Dubbing (Copying)
For Playback
Operation
1
Press the Play Button on the Movie Camera to start playback.
2
Press the Record Button on the VTR to start recording.
Note:
The picture quality of a copied tape is inferior to that of the original
tape.
• For details, refer to the operating instructions of the recording
VTR.
Synchro Editing
Use the Synchro Editing Cable (optional) to connect the Remote
Control Socket on the Movie Camera with the synchro edit socket
on the recording VTR.
• If the recording VTR is equipped with Synchro-Edit function, this
Movie Camera can be operated via the recording VTR, i.e.
playback start and stop of the Movie Camera will be synchronized
with the recording start and stop on the VTR.
•For details, refer to the operating instructions of the recording
VTR.
For Recording
-16-