Specifications, Warranties and disclaimers – KEYENCE BL-600 Series User Manual
Page 6

6
SPECIFICATIONS
General specifications
1. Reading bar width indicates the range of readable narrow bar width when the bar code type is CODE39.
2. Maximum reading label width includes the bar code margin (quiet zone).
3. When start/stop character of CODE128 is CODE-C, up to 64 digits are allowed.
Note: The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).
Model
BL-600
BL-601
BL-600HA
BL-601HA
BL-650HA
BL-651HA
Type
Standard type
High-resolution
High-resolution, side-scanning type
Scanning direction
Front
Side
Light source
Semiconductor laser
(Wavelength: 650 nm)
Laser
Class
FDA (CDRH) Part
1040.10
Class II Laser Product (Pulse duration:56
μ
s, Output:1.5mW)
IEC 60825-1
Class 2 Laser Product (Pulse duration:112
μ
s, Output:85
μ
W)
Scan method
Single
Raster
Single
Raster
Single
Raster
Reading distance
75 to 330 mm
(When narrow width is 1.0 mm)
55 to 190 mm
(When narrow width is 0.5 mm)
45 to 175 mm
(When narrow width is 0.5 mm)
Reading bar width
1.
0.19 to 1.0 mm
* 0.25 to 1.0 mm for CODE93 and CODE128
0.125 to 1.0 mm
* 0.15 to 1.0 mm for CODE93 and CODE128
Maximum reading label
width
2.
250 mm
(When reading distance is 280 mm)
156 mm
(When reading distance is 174 mm)
170 mm
(When reading distance is 155 mm)
PCS
0.6 or more (white reflection rate 75% or more)
Scan count
500 scans/second
Supported codes
CODE39, ITF, Industrial2of5, COOP2of5, Coda bar CODE128, GS1-128, CODE93, EAN / UPC(A•E)
Reading digit
32 digits max.
3.
Enclosure rating
IP65
Ambient light
Sunlight: 10000 lx
Incandescent lamp: 6000 lx
Ambient temperature
0 to 45°C
Relative humidity
35 to 85%
Operating atmosphere
No dust or corrosive gas present
Vibration
10 to 55 Hz, amplitude 1.5 mm, 2 hours each in X, Y and Z directions.
Power supply voltage
5 V DC ±5%
Power consumption
330 mA max.
Weight
Approx. 115 g
Approx. 130g
Interface specifications
Raster width specification
In raster scan mode, the BL-600 scans multiple positions of the bar code by swinging the laser
beams up and down. Thus, the bar code can be read even if it has a stain or missing part.
For the up-down width of raster scan (raster width), see the table below.
Warranties and Disclaimers
(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a
period of one (1) year from the date of shipment. If any models or samples were shown to
Buyer, such models or samples were used merely to illustrate the general type and quality of
the Products and not to represent that the Products would necessarily conform to said
models or samples. Any Products found to be defective must be shipped to KEYENCE with
all shipping costs paid by Buyer or offered to KEYENCE for inspection and examination.
Upon examination by KEYENCE, KEYENCE, at its sole option, will refund the purchase price
of, or repair or replace at no charge any Products found to be defective. This warranty does
not apply to any defects resulting from any action of Buyer, including but not limited to
improper installation, improper interfacing, improper repair, unauthorized modification,
misapplication and mishandling, such as exposure to excessive current, heat, coldness,
moisture, vibration or outdoors air. Components which wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various Products. They are only
suggestions, and it is Buyer's responsibility to ascertain the fitness of the Products for
Buyer’s intended use. KEYENCE will not be responsible for any damages that may result
from the use of the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are not to be used
internally in humans, for human transportation, as safety devices or fail-safe systems, unless
their written specifications state otherwise. Should any Products/Samples be used in such a
manner or misused in any way, KEYENCE assumes no responsibility, and additionally Buyer
will indemnify KEYENCE and hold KEYENCE harmless from any liability or damage
whatsoever arising out of any misuse of the Products/Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED WITH
NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND STATUTORY
WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-
INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.
IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE LIABLE TO ANY
PERSON OR ENTITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL
OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY DAMAGES
RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF
INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF
SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR
TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH
THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS
AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTY’S CLAIM FOR
DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some jurisdictions, some of the
foregoing warranty disclaimers or damage limitations may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered to a third party, Buyer
must provide such third party with a copy of this document, all specifications, manuals,
catalogs, leaflets and written information provided to Buyer pertaining to the Products/Samples.
E 1101-3
Trigger input
Non-voltage input (relay contact, solid state)
* TTL input is also available.
OK/NG
output
Output type
NPN open collector
Rating load
24 V DC, 30 mA
Leakage current at OFF
0.1 mA max.
Residual voltage at ON
0.5 V max.
Serial
interface
Applied standard
In accordance with RS-232C
Synchronization
Start-stop synchronization
Transmission code
ASCII code
Baud rate
600, 1200, 2400, 4800, 9600, 19200, 31250,
38400 bps
Data length
7/8 bit
Parity check
None/even/odd
Stop bit length
1/2 bit
Model
Reading distance
Raster width
BL-601
120 mm
7.1±1.8 mm
BL-601HA
90 mm
5.5±1.4 mm
BL-651HA
65 mm
5.5±1.4 mm
Copyright (c) 2013 KEYENCE CORPORATION. All rights reserved.
12617E 1063-1 96M12617 Printed in Japan