KEYENCE BL-600 Series - Manual

1
SAFETY PRECAUTIONS
This manual describes the instructions, operating procedures and
precautions for using the BL-600 Series.
Before beginning operation, please read this manual carefully to get the
most from your BL-600 Series.
Keep this manual handy for future reference.
CAUTION
• The BL-600 uses a 5 V DC power supply. Using a different voltage
level may damage the unit.
When using the KEYENCE power supply unit BL-U1, BL-U2, N-42
or N-48, select the voltage level which can be supplied by the
power supply unit. If a non¦conforming power supply is
connected, the BL-600 may be damaged.
• Before connecting or disconnecting the cable, be sure to turn off
any device connected to the BL-600 Series. Otherwise, the BL-
600 Series may be damaged.
• Do not disassemble or modify the BL-600 Series, as this may
cause product failure.
• Locate cables as far as possible from high-voltage lines and
power lines. Otherwise, generated noise may cause product
failure or malfunctions.
• The BL-600 is a precision instrument.
If the unit is dropped or shocked, it
may be damaged. Take due
consideration when transporting or
installing the unit.
• Do not hold the cables when carrying
the units. The units may hit each other
and become damaged.
Laser Bar Code Reader
BL-600 Series
Instruction Manual
Incorrect
Incorrect
LASER SAFETY PRECAUTIONS
1. Classification
2. Warning Labels
1) Warning Labels
3. Labels Location
Warning labels are attached to the sensor head as shown below.
4. Safety Consideration
Model BL-600/601/600HA/601HA BL-650HA/651HA
FDA (CDRH) Part 1040.10 Class II Laser Product
IEC 60825-1 Class 2 Laser Product
LASER RADIATION
WHEN OPEN.
DO NOT STARE
INTO BEAM.
CAUTION
LASER RADIATION-
DO NOT STARE INTO BEAM. LASER RADIATION
IS EMITTED FROM
THIS APERTURE.
SEMICONDUCTOR LASER 650 nm
MAXIMUM OUTPUT 1.5 mW
PULSE DURATION 56 µs
CLASS II LASER PRODUCT
AVOID EXPOSURE
CAUTION
CAUTION
LASER RADIATION-
DO NOT STARE INTO BEAM. AVOID EXPOSURE
LASER RADIATION
IS EMITTED FROM
THIS APERTURE. SEMICONDUCTOR LASER 650 nm
MAXIMUM OUTPUT 1.5 mW
PULSE DURATION 56 µs
CLASS II LASER PRODUCT
FDA (CDRH)
BL-600/601/600HA/601HA BL-650HA/651HA
IEC/EN
BL-600/601/600HA/601HA BL-650HA/651HA
CAUTION
Use of controls or adjustments or the performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
LASER ON
OK /N G
TI MI NG TEST
BL-600
LASER RADIATION
WHEN OPEN.
DO NOT STARE
INTO BEAM.
CAUTION
LASER RADIATION-
DO NOT STARE INTO BEAM. LASER RADIATION
IS EMITTED FROM
THIS APERTURE.
SEMICONDUCTOR LASER 650 nm
MAXIMUM OUTPUT 1.5 mW
PULSE DURATION 56 µs
CLASS II LASER PRODUCT
AVOID EXPOSURE
CAUTION
LAS ER O N OK /NG TIM IN G
TE ST
BL -60 0
CAUTION
LASER RADIATION-
DO NOT STARE INTO BEAM. AVOID EXPOSURE
LASER RADIATION
IS EMITTED FROM
THIS APERTURE. SEMICONDUCTOR LASER 650 nm
MAXIMUM OUTPUT 1.5 mW
PULSE DURATION 56 µs
CLASS II LASER PRODUCT
CAUTION-LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
z BL-600/601/600HA/601HA z BL-650HA/651HA
96M12617