KEYENCE SR-750 Series - Manual (Page 6)

6 SR-750_AFM_E
(1) Comparison/preset setting
Sets the comparison/preset function.
• Comparison method
Default : Normal
Setting range : Normal or Sequential
• Origin
Default : 1
Setting range : 1 to 7089
• Length
Default : 494
Setting range : 0 to 494
When the comparison method is Sequential, set the increment.
• Length
Default : 9
Setting range : 0 to 9
• Increment
Default : 1
Setting range : -9999 to 9999
(2) Operation configuration of the switches, laser pointer, and the multiple LED
indicator
• TUNE button
Check this to enable/disable the operation of the TUNE button.
Set this to deactivate the TUNE button during operation.
• TEST button
Uncheck this to inhibit the test mode result data started with the TEST button.
• Laser pointer lighting with the TUNE button
Sets the pointer lighting condition by TUNE button operation.
Default : By
operation
Setting range : Lock.....................The laser pointer does not light up by
TUNE button operation or each operation
mode.
Test mode only ....Only in the test mode, the pointer lights up
by the TUNE button.
Run mode only ....Only in the run mode, the pointer lights up
by the TUNE button.
By operation.........Regardless of the test mode or the run
mode, the pointer lights up by the TUNE
button.
• LED indicator
Uncheck this to stop the parameter bank number display of reading success
for the multiple LED indicator.
(3) Silent mode setting
Restrains data output of checked items.
Default
: All disabled
Setting range : Read OK/Comparison OK
Comparison NG
Read ERROR
Stable Reading (OK/Comparison NG)
Unstable Reading (OK/Comparison NG)
Preset Result
Test mode
„ Addition of Table items
This section describes the items added only to the Table tab.
• Composite symbol delimiter
Sets the delimiter between the 1D code data and 2D code data of composite Code
(CC-A/B/C).
Default : Not
selected
Setting range : five or less characters
• Bank shift shortening operation
If it has been determined that the scanned image cannot be decoded within the
specified decode timeout period, set this option to select either performing the next
scanning immediately or waiting for the decode timeout period expiration.
Default : Enable
Setting range : Enable or Disable
„ Name change of Table items
• Specify response character (SR-600 compatible output mode)
The name has been changed as follows.
New: Specify response character (SR-600 compatible output mode)
↑
Old: Specify response character
5 Modified and Added Configu-
ration Commands
Parameter bank configuration command (WB/RB)
„ Modifications
„ Addition
Function
Command
number
Setting value Explanation Default
Symbology 300
1 to 3,
5 to 16
1 : QR
2 : DM
3 : PDF417 (MicroPDF)
5 : GS1DataBar (RSS)
6 : CODE39 (Trioptic CODE 39)
7 : ITF
8 : 2of5
9 : NW-7 (Codebar)
10 : JAN/EAN/UPC
11 : CODE128
12 : COOP2of5
13 : CODE93
14 : CC-A/B (GS1 DataBar)
15 : CC-A/B (EAN/UPC)
16 : CC-A/B/C (GS1-128)
1
Maximum read
length
303 1 to 7089
Not applicable to the CC-A/B/C 2D
code
7089
Minimum read
length
304 1 to 7089
Not applicable to the CC-A/B/C 2D
code
1
CODE39
settings
378 0,1
Read Trioptic CODE39
0 : Disable
1 : Enable
1
Quiet zone
scale factor
611
Other than
GS1DataBar,
CC-A/B
(GS1
DataBar):
4 to 11,
GS1DataBar,
CC-A/B
(GS1
DataBar):
0 to 11
Quiet zone scale factor (x 1)
* Barcode only
* Barcode section only for
Composite Code
• Other than GS1 DataBar: Applied to
the quiet zones at both ends
• GS1 DataBar: Applied to the right
quiet zone of GS1 DataBarLimited
Depends
on the
code
type.
Function
Command
number
Setting value Explanation Default
Maximum read
length
315 1 to 2361 Applicable to the CC-A/B/C 2D code 2361
Minimum read
length
316 1 to 2361 Applicable to the CC-A/B/C 2D code 1
PDF417
settings
420 1 to 3
PDF417 read code type settings
1: PDF417 only
2: MicroPDF only
3: PDF417 and MicroPDF
3
Reading CC-A/
B/C (GS1-128)
437 0,1
CC-C code
0: Disable
1: Enable
1