KEYENCE IV-H1 - Manual (Page 4)

2012
12232E 1123-2 96M12232 4
IV Series (IV Software) - IM_E
5
Select [Use the following IP address] and input
the IP address and subnet mask.
y IP address : 192.168.10.1
y Subnet mask : 255.255.255.0
For direct connection, set an arbitrary IP
address (The above is an example).
To connect with the existing network, input the
IP address that was assigned by the network
administrator.
6
After the setting is completed, click the [OK]
button and close all the windows.
Specifications
Model IV-H1
System requirements
Interface Equip the Ethernet (100BASE-TX) interface
OS
Windows 7 Home Premium/
Professional/Ultimate *1
Windows XP Professional/HomeEdition;
either of OS above needs to be pre-installed
Languages
Japanese / English / Deutsch /
Chinese (Simplified) / Chinese (Traditional) /
Italian / French / Spanish / Portuguese /
Korean
Processor
Windows 7:
Needs to be compliant with system
requirements for OS.
Windows XP:
Pentium III or better
Clock speed 1 GHz or faster
Memory
capacity
Windows 7:
Needs to be compliant with system
requirements for OS.
Windows XP:
512 MB or more (1 GB or more is
recommended)
Required
capacity for
installation
1 GB or more
Monitor
Resolution 1024 x 768 pixel or higher,
Display color High Color (16bit) or higher
Operating
conditions
.NET Framework 2.0 SP2 needs to be
installed *2
*1 Supported for 32bit and 64bit version.
*2 If .NET Framework 2.0 SP2 is not being installed, this will
be automatically installed at the time of IV-H1 installation.
Warranties and Disclaimers
(1) KEYENCE warrants the Products to be free of defects in materials and
workmanship for a period of one (1) year from the date of shipment. If any
models or samples were shown to Buyer, such models or samples were
used merely to illustrate the general type and quality of the Products and not
to represent that the Products would necessarily conform to said models or
samples. Any Products found to be defective must be shipped to KEYENCE
with all shipping costs paid by Buyer or offered to KEYENCE for inspection and
examination. Upon examination by KEYENCE, KEYENCE, at its sole option,
will refund the purchase price of, or repair or replace at no charge any Products
found to be defective. This warranty does not apply to any defects resulting from
any action of Buyer, including but not limited to improper installation, improper
interfacing, improper repair, unauthorized modification, misapplication and
mishandling, such as exposure to excessive current, heat, coldness, moisture,
vibration or outdoors air. Components which wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various Products.
They are only suggestions, and it is Buyer's responsibility to ascertain the
fitness of the Products for Buyer’s intended use. KEYENCE will not be
responsible for any damages that may result from the use of the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are not
to be used internally in humans, for human transportation, as safety devices or
fail-safe systems, unless their written specifications state otherwise. Should any
Products/Samples be used in such a manner or misused in any way, KEYENCE
assumes no responsibility, and additionally Buyer will indemnify KEYENCE and
hold KEYENCE harmless from any liability or damage whatsoever arising out of
any misuse of the Products/ Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE
PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS,
IMPLIED, AND STATUTORY WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY
RIGHTS, ARE EXPRESSLY DISCLAIMED. IN NO EVENT SHALL KEYENCE
AND ITS AFFILIATED ENTITIES BE LIABLE TO ANY PERSON OR ENTITY
FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR
CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY
DAMAGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION,
LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS
OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF
SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY
MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR
INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS
AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTY’S
CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some
jurisdictions, some of the foregoing warranty disclaimers or damage limitations
may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered to a
third party, Buyer must provide such third party with a copy of this document, all
specifications, manuals, catalogs, leaflets and written information provided to
Buyer pertaining to the Products/Samples.
E 1101-3