KEYENCE IV Series - Manual (Page 4)

4
6. Set the threshold to judge OK and NG.
7. After the setting is completed, click the [OK] button. The display will
return to the main screen for the Outline tool settings.
8. Click the [OK] button.
9. After the setting is completed, click the [Next to STEP4] button to
proceed to “STEP4”.
 Setting the detection tool (Color Area/Area tool)
1. Click the [Add Tool] button.
2. Click the [Color Area/Area] button and click the [OK] button..
3. Click the [OK] button and open the main screen for Color Area/Area
tool settings.
4. Set the position, size, and the angle of the tool window.
5. Click the [Setup] button for Color/Brightness Extraction.
6. Click the color/brightness to be the reference of judgment for the
Color Area/Area tool.
7. Click the [Limit Adjustment] button.
8. Set the threshold to judge OK and NG.
9. After the setting is completed, click the [OK] button. The display will
return to the main screen for the Color Area/Area tool settings.
10. Touch the [OK] button.
11. After the setting is completed, click the [Next to STEP4] button to
proceed to “STEP4”.
 Setting the detection tool (Pos.Adj.)
1. Click the [Add Tool] button.
2. Click the [Position Adjustment] button and click the [OK] button.
3. Click the [OK] button and open the main screen for Position
Adjustment tool settings.
4. Set the position, size, and the angle of the tool window. The
detected outline will be displayed in green.