Cub Cadet 7532 - Manual (Page 188)

1 Hydraulic System
14
1.5.5 Position Control
• P/C system (Position Control) is equipped as a lift control for 3-point hitch.
• The cylinder is independent control type. (Only raise the hitch by hydraulic pressure and lower by weight.)
• The lock, functioning as well as flow control valve (lowering speed adjusting valve), located in forepart of lift
case shall be used for adjustment of lowering speed for the lift arm.
• Position of the lift arm is controlled by P/C lever.
1 Specifications (Hydraulic Cylinder)
Cylinder Diameter × Stroke ш 75 Ч 100.7mm {ш 2.95 Ч 3.965in}
Maximum Dynamic Lift 1035kgf {2282lbf}
Preset Maximum Pressure 15.2MPa (155kgf/cm
2
, 2205psi)
(92mm {3.62in})
Oil
M
O
S
2
-P
M
O
S
2
-P
Bush slit (R & L)
45
Lock screw
Lock screw
(
f 75mm
{
f 2.95in})
(R95mm
{R3.74in})
(R230)
(47
)
(17
)
Match the punch marks of
power arm and shaft.
Bush slit
1
16
Flow control valve
14
17
4 5 6 7 8 9 2 3 11 10 12 13
16
15
18 20 21 22
19
16
GZ3W31-010