BUCHI SpeedExtractor E-916 - Manual (Page 31)

4 Description of function
31 SpeedExtractor E-916/E-914 Operation Manual, Version D
4.5.3 General information on buttons
The following control buttons are available in the software for navigation and input configuration:
Open the extraction menu
Open the menu functions like leak test, instrument settings etc.
Open the status menu
Get back to the previous screen
Get on to the next screen or entries of a screen
Leave the current screen and get back to the main display
Get back to the start screen without saving possible settings
Backward button to move backward within the submenu structure
Forward button to move forward within the submenu structure
Move up within the entries of a screen
Move down within the entries of a screen
Affirm a screen message
Negate a screen message
Switch on the position or function
Switch off the position of function
Switch on all extraction positions
Copy the entry of currently active parameter of the extraction method to the LEAK
TEST or copy the entries of an extraction cycles
Paste the entries of a copied extraction cycle to a new cycle
Start process except for the extraction process (leak test, flush etc.)
Open the solvent list to select a default solvent
Edit the name of a solvent in the solvent list or the entries of an extraction cycle
Delete all characters of an entry when naming a solvent/program
Confirm the selection of a character when naming a solvent/program
Save a solvent/program under the entered name
Load the predefined solvents by replacing the first 10 entries of the list
Move lift (heating block or rack) up
Move lift (heating block or rack) down
Stop moving the lift
Skip an extraction step or stop the running leak test