BUCHI SpeedExtractor E-916 - Manual (Page 30)

4 Description of function
30 SpeedExtractor E-916/E-914 Operation Manual, Version D
a
b
c
d
e
a Performing a LEAK TEST (see section 6.2.5).
b Flushing the lines with solvent in collection vials or a waste
bottle. Parameters like time, flow rate and solvent mixtures are
defined in submenus (see section 6.2.6).
c Defining instrument settings like language, contrast of the dis-
play, acoustic signals, preheat demand when the instrument is
turned on.
d SOLVENT LIST shows the default solvent list which includes the
10 most frequently used solvents. This list can be edited and
modified as needed (see section 6.2.2).
e The SERVICE FUNCTIONS submenu provides access to
main instrument components for first quick trouble shooting
purposes. All valves can individually be opened or closed. All
safety sensors which check the position of the heating block,
safety shield or collection rack as well as all pressure sensors
are listed. The pump can be directly operated with different
flow rates. With the help of a flow test faulty lines can easily be
located. The lift of the heating block and collection rack can
be driven independently. The performance of the fan can be
changed. Information about instrument and operating hours are
shown. For further information see section 8.2.
NOTE
Some submenus contain hidden lines as it is not possible to
show all information on the display. In this case a scroll bar
on the right hand side indicates the presence of hidden lines.
Move down with down button to get access to this informa-
tion.