Brookfield DV2T Viscometer - Manual (Page 54)

Brookfield Engineering Labs., Inc. Page 54 Manual No. M13-167-B0614
IV.4.8 Calibration Reminder
The DV2T can be programmed to provide the user with a reminder that calibration is due.
Two parameters must be set: Frequency in Months and Start Date. When both parameters
are entered, the Calibration Reminder screen (see Figure IV-11) will calculate and display
the day when the reminder will be presented.
Check the Calibration Reminder On check box to activate this feature.
Figure IV-11
The Calibration Reminder will be presented during the first power up on or after the specified
day. The message box (see Figure IV-12) requires that the user press OK before the
AutoZero will be performed.
Figure IV-12
The calibration reminder will be reset by Brookfield or your authorized Brookfield dealer
when the unit is returned for calibration.
IV.4.9 Save Audit Trail
The Audit Trail is a collection of instrument check values that can assist Brookfield with
troubleshooting activities. You may be asked to provide the Audit Trail files. Use Save
Audit Trail to create an Audit Trail file on a USB stick. Two files will be created: Users.bin
and Service.bin.