How to poll – Panasonic Panafax UF-260 User Manual

Page 69

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How to Poll

The following procedure lets you poll one station, or up to 100 stations. However,

if you want to poll two or more stations, you must use One-Touch dialing or Abbreviated

dialing numbers. Multistation polling does not require a Relay Station. Be sure to
set the poliing password before polling (see page 65).

FUNCTION

and

Dial by pressing a One-Touch key,

ABBR and two digits, or TEL/DIAL

and a full number.

Ex: lABBRl and [3][5], or

TELyDIALir7]f7l[y]f2

HSH]

To add more stations, use One-Touch

keys, or ABBR I and two digits.

Ex: One-Touch key [Ts

POLLING

ENTER STATION(S)

POLLING

( 3 5 ) ( S t a t i on name)

POLLING

7772345|

POLLING

[ 1 5 ] ( S t a t i on name)

* DIALING *

[ 1 5 ] ( S t a t i o n name)

NOT€

1. To erase or change stations set in Steps 2 or 3, press 1 CLEAR 1. If you recorded

several, use MODE or to find the station you want. Then press

CLEAR I. Add new stations with One-Touch keys, or

ABBR

and two digits.

2. If a polled station is busy, or does not answer, it will be skipped and the next station

will be polled. The skipped station(s) will be redialed up to twice after all registered
stations have been polled.

3. When polling ends, a Multistation Communication Journal is automatically printed out.

This journal lists the stations polled and indicates whether polling was succ^sful or not.