Setting/replacing recording paper – Panasonic Panafax UF-260 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Setting/Replacing Recording Paper

1, Press the latch button on the right side of the cover and open the Receiving Unit.

Remove the Head Protective Sheet.

Receiving Unit

Head Protective Sheet

Latch Button

Set the recording paper into the unit and feed the leading edge of the paper

between the guide plates of the cutter unit until it projects out of the unit. Make
sure that the recording paper is set correctly as shown in the figure below. If it

is set incorrectly, the machine will not reproduce images.

2. If the recording paper cannot pass between the guide plates, turn the Cam Wheel

as far as you can in the arrow direction.