Setting fax parameters, Fax parameters – Panasonic Panafax UF-260 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FAX PARAMETERS
Your facsimile machine has a variety of adjustable FAX parameters. These
parameters, listed in the Parameter Table, are normally preset for you and do not
need to be changed. If you do decide to change anything, read the table carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp
parameters, can be temporarily changed by simple key operations just before a
transmission is made. When the transmission ends, however, these parameters return
to their preset values. Other parameters can only be changed by the procedure
described below.
Setting Fax Parameters
1
FUNCTION
and
. or
MODE
CZUCZD
n„rQ
repeatedly.
Enter a fax parameter number (always 2
digits) from the Parameter Table (see
pages 29 and 30).
Ex: [o] [
3
] for Verification Stamp ON/
OFF.
Enter the new setting value.
Ex: [
2
] for Verification Stamp OFF.
(Note: The bracketed number is a factory
preset value which you may ignore.)
FAX PARAMETER
N0.03(1]»B
FAX PARAMETER
NO. 0 3 [ 1 ] = |
27