Czdizjd, Setting the dialing method (tone or pulse) – Panasonic Panafax UF-260 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Dialing Method (Tone or Pulse)
Your facsimile machine can operate with either one of two dialing methods (Tone
or Pulse), depending on the type of telephone line you are connected to.
Your facsimile machine is preset at the factory for Pulse (Rotary) Dialing. If your
facsimile machine requires Tone Dialing, set to Tone Dialing using the following
procedure.
4
and
, or
c
START
CD
SET MODE
NO. =1
MODE
CZDIZJD
FAX PARAMETERS
f
Ì or
}
----------------
s
repeatedly.
FAX PARAMETER
NO.|
n
Enter the two-digit Fax parameter
number.
Press [5] [
7
].
Enter the new setting value.
Press
[T].
m changes to Tone Dialing.
To return to Pulse Dialing, press
[2
FAX PARAMETER
N O . 0 7 [ 2 1 - 1
F A X PARAMETER
N O . 0 7 [ 2 ] = B
NOT€
To return to standby,
If you make a mistake to enter the Fax parameter number, press CLEAR I then
reenter the correct number.
17