Panasonic CF-25 - Manual (Page 30)

Dealing with Problems
When a problem occurs please refer to this page If you think it has to do with the softwaie application you are using please
read the related manual 11 for some reason you still cannot figure out the problem, please consult your nearest Panasonic dealer
• Starting Up
The power indicator or bat­
tery indicator IS not Ht,
t
• Check the cable connection (or the AC adapter ^
• Check to see if a iully charged battery is pioperly installed page 14
• Pressing the reset button will solve the problem
(y page 42
g IS displayed ^
Please input your password 11 you have lorgotten it consult your nearest Panasonic dealer
IS not displayed
(Ooce this icon is executed.' it ssitl
nut be displased later) ^ ^
If before you double-click it disappears, select [StartJ-[Run|, input
[c \util\avapp\psetup bat] and press \ ok , |
1 "is not displayed
CF:i 0 url '' '( i "
Select |Siartl-[Run], input fc \utii\avapp\manualVseticon bat) and press | or , ]
[POST Start Up Errorts)] is
displayed . ' -
y page 29
The pre-memory count,
AVindows startup, or an op­
eration is extremely slow
Run [Load Default Settings iPnP)] in the Setup Utility This will restore the Setup Utility’s
settings to their default values (except the passwnan once again for you to input the appropriate operating environment settings (The processing
speed depends on the application software used so this operation may not cause the processing
spieed to increase )
The date and time are '
incorrect ; I
• You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control Panel]
Another way is with the DATE and TIME commands in MS-DOS
• If you continue to experience problems the internal battery maintaining the clock may
need to be replaced Please consult your nearest Panasonic dealer
Battery Indicator
The red battery indicator "
-lights.
^ Repeated beeps sound while
the computer is in use.
The battery level is low Connect the AC adapter or replace the battei y pack with a fully
charged one If you have neither the adapter nor an extra battery save your data and power
off your computer
The red battery indicator
lights, a beep sounds
The battery temperature has iiscn due to electrical discharge caused by a large load Connect
the AC adapter set the power-saving function and turn down the brightness ot the display to
reduce the load on the battery
The red indicator blinks
• The battery pack or recharging tunction may be detective Quickly remove the battery
pack and disconnect the AC adapter then connect them again
• If the problem persists consult your nearest Panasonic dealer
The red indicator lights (or
.1 99% readin}’ is dtspla><;tii for
an extended period of time
When the battery pack is fully charged turn on your computer unplug the AC adapter then
completely discharge the battery
Alter the AC adapter is con­
nected, the orange indicator
blinks five times
Unable to charge because ol an improper temperature range q = page 15
Character Input
Unable to input anything
hut numerals
If NumLk and Key Pad are on the Numeric Key Pad is ON To swiicli it OFF
press (g| + ( 1 ^^
Only capital letters are
being input 11 CapsLock IS on the Caps Lock is ON To switch it OFF press [( wl H]
How to input European
characters (11, a, g) or
symbols IS unclear
Select |Statt] - (Run) input |c \windows\charmap e\e] and press | oi | The Character
Map will he displayed Point to the desired tout name and select it
30