Panasonic KX-PNB2 - Manual (Page 4)

Features_______________________________________
• Supports 100Base-TX and lOBase-T
• Supports the following operating systems
- Windows® 95*^/Windows 98*^/Windows NT 4.0*^
- NetWare 3.x/NetWare 4.x/NetWare 5.0
- Generic Unix System V Release 3.x, Generic Unix System V Release 4.x, SCO Unix 5.x, SUN
OS 5 (System V, Solaris 2.x), HP-UX (Rel 9.x & Rel 10.x), SUN OS 4 (BSD, Solaris 1 .x), Linux
- Macintosh 7.5x, 7.6x, 8.x, 9.0
• Supports the following print protocols
- Windows IP Peer-to-Peer Printing
- Windows IPX Peer-to-Peer Printing
- Windows DLC Peer-to-Peer Printing
-LPR
-PSERVER
- NetWare Printing (PSERVER/RPRINTER in NDS and/or Bindery Mode)
• Supports the following network protocols
- TCP/IP -IPX/SPX
- DLC/LLC -AppleTalk
- DHCP -BOOTP
- RARP -SNMP/MIB
-HTTP
Microsoft® Windows® 95 operating system (hereafter Windows 95)
Microsoft® Windows® 98 operating system (hereafter Windows 98)
Microsoft® Windows NT® Workstation operating system and Microsoft® Windows NT®
Server network operating system Version 4.0 (hereafter Windows NT 4.0)
Instructions on the CD-ROM
This Quick Installation Guide describes how to set up the network in Windows 95/Windows 98/
Windows NT 4.0.
Please refer to the KX-PNB2 User’s Guide on the printer’s CD-ROM for detailed information on
other network environment setup, troubleshooting, etc.
To open the file, perform the following steps after installing the Acrobat Reader program by referring
to the printer’s Setup Guide.
(1) Insert the CD-ROM in your CD-ROM drive.
(2) Double-click the Manual folder and English folder.
(3) Double-click the pnb2.pdf.