Selecting the network print method, Printing directly from a computer, When using tcp/ip protocol – Panasonic KX-PNB2 User Manual
Page 11: When using ipx/spx protocol, D when using dlc protocol
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Network Print Method
There are two ways of network printing. You may need to contact your network administrator to
select it.
• Printing directly from a computer
• Printing through the shared computer (server) (page 12)
Printing directly from a computer
A print job of a computer is transferred directly to the Network Card (printer). This method is
recommended for a small network and has the advantage of fewer setup steps. However, as the
network gets larger, there will be more network traffic causing longer waiting status for the print jobs
to be printed.
Firstly, select a network protocol which you are using or want to use.
Secondly, select the printing method.
When using TCP/IP protocol:
IP Peer-to-Peer Printing
(Windows 95/Windows 98/Windows NT 4.0)
C = > C
3
l = l l = I C
3
C = I E Z I E = l l = l l = l l = I C
3
t n
g • LPR Printing (Windows NT 4.0)
^ When using IPX/SPX protocol:
D
D
IPX Peer-to-Peer Printing
(Windows 95/Windows 98)
D When using DLC protocol:
• DLC Peer-to-Peer Printing (Windows 95/Windows 98)
0
D
D
C
j
O
Q
G
0
See page 13.
See the KX-PNB2
User’s Guide on the
printer’s CD-ROM.
Computer C
o
o
a
11