Installing the printer driver, Installing ip peer-to-peer printer port, 1 insert the cd-rom in your cd-rom drive – Panasonic KX-PNB2 User Manual
Page 20: 2 click english and click network utilities, 3 select a printer model and click | select, 4 click i nex^l three times, 5 click next, 6 quit all applications and click ¡finish
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 3: Installing and setting up IP Peer-to-Peer printer port on
the computer
■ Installing the printer driver
If the printer driver has not been installed, install it by the CD-ROM supplied with the printer. For
detailed instructions, see the printer’s Operating Instructions on the CD-ROM.
y-------------------------------------------------------------------------------------------------------------------X
N
ote
• If installing the PostScript printer driver, select “Local printer” when a message to
select local printer or network printer appears. And select LPT1 when available port
list appears.
V____________________________________________________________________
J
Installing IP Peer-to-Peer printer port
1
Insert the CD-ROM in your CD-ROM drive.
2
Click English and click Network Utilities.
3
Select a printer model and click | Select.
4
Click I Nex^l three times.
• If installing the Network Setup Tool as the same time, click Full.
Click th« type of Sotup yo -Defer i pt i on ^ infteMotion only port »onitor for printing through network. < B*ck I > 5 Click Next> 6 Quit all applications and click ¡Finish Your computer will be restarted. 20