22 press item 6 button, 24 press enter/cancel button, 26 press enter/cancel button – Panasonic KX-PNB2 User Manual

Page 18: 27 press on line/continue button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Press ENTER/CANCEL button.

SM BYTE4

XXX

Press ITEM 6 button.

GW BYTE1

Enter the leading 3 digits of the Default Gateway. (To decide the

value, see the Example on page 14.)

• Pressing the VALUE Q button once will increase the value by one.

(if you keep pressing the button, the value will continue to increase.)

• Pressing the VALUE button once will decrease the value by one.

The value is set at 255 after 0.

(if you keep pressing the button, the value will continue to decrease.)

GW BYTE1

XXX

Press ENTER/CANCEL button.

GW BYTE1

XXX I

Repeat steps 22 to 24 three times to finish entering value of the

Default Gateway.

Press ENTER/CANCEL button.

Press ON LINE/CONTINUE button.