Panasonic KX-FP101NZ - Manual (Page 66)

Receiving Faxes
Extension telephone
If you connect an extension telephone to the same line, you can receive fax documents using the extension
telephone. You do not have to press iSTART/SEf/COPY] on the unit.
Important:
• Use a touch tone telephone as the extension telephone and enter the fax activation code
firmly.
1
2
3
When the extension telephone rings, lift the
handset of the extension telephone.
When:
— document reception is required,
— a fax calling tone {slow beep) is heard, or
— no sound is heard,
press (3 [9] (pre-selected fax activation code)
firmly.
Hang up the handset.
• The unit will start reception.
Extension telephone
Note:
♦ You can change the fax activation code (see
below).
Fax activation code
The fax activation code is used when receiving faxes using an extension telephone (see above).
Important:
• This code should be different from auto disconnection code (p. 69).
1
2
3
4
5
Press
(MÈNU].
Display:
Press SI, then 3] |T|.
1.SYSTEM SET UP
®/®
[MENU]
FAX ACTIVATION
Press [sfARt/SET/COPY]
MODE=ON ▼A
Press [ t ] or ( a ) to select “ON”.
©dXD
®®CD
O
Yo\
• If this feature is not required, select “OFP.
3
Press fSTART/SET/COPYi.
(START/S Et/COPY)
CODE= * 9
7
8
• The display will show the pre-selected code.
Enter the new code.
• This code can be from 2 to 4 digits in length
using 0-9, and *.
Press iSTART/SET/COPY].
Press fflEN®.
SETUP ITEM t 3
Note:
• If you subscribe to any special telephone
company services which require a code, all
or part of the fax activation code must be
different from the service access code.
® The fax activation code should not be set to
“
0000
”.
66