Panasonic KX-FP101NZ - Manual (Page 23)

Setup
Date and time, your logo and facsimile
telephone number ------------
You should program the date and time, your logo and facsimile telephone number.
This information will be
printed on each page transmitted from your unit.
Your logo Your facsimile telephone number Date and time
Example:
FROM ; Panasonic Fax FAX KO. : 1234567
Fax Correspondence
'peb. 26 1999 04:02P m ' PI
Setting the date and time
Press iiÿÎËNÜÎ.
2
Display:
Press @, then [O] [T].
1.SYSTEM SET UP
SET DATE £c TIME
Press
(START/SET/CO^.
M :01/D:
I-----n,
01/Y:99
Cursor
4
Enter the correct month/day/year by selecting
each 2 digits using the dial keypad.
Example:
Aug. 10, 1999
Press (HCS [IS] [E®.
M:Û8/D:10/Y:99
Press
ÌSTART/SET/COPYÌ.
TIME: 12:00AM
6 Enter the correct hour/minute by selecting
each 2 digits using the dial keypad.
Press @ to select “AM” or “PM”.
Example:
3:15PM
1. Press [0][1)[1][1].
TIME: Û.3 :15AM
2. Press [3 until “PM” is displayed.
TIME: 03 :15PM
Press
iSTART/SET/CO^.
SETUP ITEM [ ]
8 Press [MENU].
CD®®
®®® Ï ,
® ® ® ;
®®®:0 CT
isfo^
D
J
(EASY DIAL]
ÍSTART/SET/COPY1
Note:
• You can enter the number by rotating
[EASY DIALl
in steps 4 and 6. In this case,
press (S fo move the cursor.
• The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
• Press (◄) or (B to move the cursor to the
incorrect number, then make the correction.
• if you press
( stop ]
while programming, the
display will return to the previous one.
5.
■ S' •
s!
■0
(S
■ a
»
23