Panasonic Panafax UF-160 - Manual (Page 65)

c. PASSWORD COMMUNICATION
Password Communications, including Password Transmission and Password
Receiving, prevent your machine from sending a fax to a wrong station or receiving
a fax from unauthorized stations. You can set Password Transmission and Password
Receiving independently, or set both together.
To use Password Transmission, you have to set Fax Parameter 11 to the valid position
(see pages 26-29) and set a four-digit Transmission Password in your machine in
advance. The password must be shared with the other UF-160 machine(s). If the
Transmission Password set in your machine does not match the Transmission
Password set in the other UF-160 machine(s), the transmission wiil fail. You can select
to use Password Transmission or not by setting PASSWD-XMT to on or off when
you send a document.
To use Password Receiving you have to set Fax Parameter 12 to the valid position
(see pages 26~29) and set a four-digit Receiving Password in your machine in
advance. The password must be shared with the other UF-160 station(s). If the
Receiving Password set in your machine does not match the Receiving Password
set in the other UF-160 machine(s), the reception will fail. Once you set Password
Receiving to on, it is valid until you change the setting to off.
You can communicate, using Password Transmission or Password Receiving, with
the following models UF-160, UF-170, UF-260 and UF-750.
126
Setting Transmission Password and Receiving Password
Before setting Transmission Password and Receiving Password, be sure to set Fax
Parameters 11 and 12 to the OFF position (see pages 26~29),
To set Transmission Password and Receiving Password, follow the procedure below.
1
6
and
SET MODE
N 0 . = |
USER P A R A M E T E R S
13
X M T - P A S S W O R D
nil
repeatedly.
Enter a four-digit Transmission Password.
Ex; [ E E E E
To set the Transmission Password,
START
X M T - P A S S W O R D
5 0 0 0
R C V - P A S S W O R D III!
Enter a four-digit Receiving Password.
Ex: E E S ®
To set the Receiving Password,
START
R C V - P A S S W O R D
6 0 0 0
D A T E & T I M E
1 2 - 0 1 - 1 9 9 0 1 5 : 0 0
NOT€
To return to standby, press fSTOP 1.
The range of password you can enter is from 0001 to 9999.
127