Reloading a recording paper – Panasonic Panafax UF-160 User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Reloading a Recording Paper

Your facsimile machine uses a roll of special recording paper. You can easily load
paper yourself by following the steps below.

Open the Receiving Unit {Control Panel) by depressing the latch button.

3. Close the receiving unit carefully by pressing both ends gently until you hear the

cover lock into position. The recording paper projected from the unit will be cut

automatically. Remove this cut paper.

2. If there is a used roll inside, lift it out and set a new roll in its place. Be sure the

direction of the roll is as shown below.

ill