Panasonic Panafax UF-160 - Manual (Page 58)

4
To add more One-Touch or ABBR
numbers {up to 100 maximum), repeat
step 3.
Ex:|ABBRiandi3Hy|.
R E L A Y E D X M T
[ 3 5 ] ( S t a t i o n n a m e )
START
(In this example Station No. 5
is the Relay Station.)
+ D I A L I N G *
[ 0 5 ] ( S t a t i o n n a m e )
NOT<
To erase or change stations set in steps 3 or 4, press [ CLEAR~j, If you recorded several,
use MODEf-Tlorl + |to find the station you want. Then press] CLEAR |. Add new stations
with One-Touch keys, or | ABBR [ and two digits.
112
Printouts and Reports
When you use Relayed Transmission, your machine will print out the following two
reports to help you check and keep track of your faxes (see pages 114-116 for
samples of these reports).
1 . Relay XMT Report (COMM. JOURNAL)
When your machine finishes transmitting to the Relay Station, it will print out a
RELAY XMT REPORT report telling you what it did and whether it was successful
or not.
^ Relay Station
Relay XMT Report (COMM. JOURNAL)
2. Result Report
When the Relay Station finishes transmitting the fax it received from you to the
end receiving station(s) in your network, and/or the Relay Station in another
network, it will print out a RELAY XMT RESULT report telling you what it did and
whether it was successful or not.
End Receiving Station
Copy of document
NOTC
If you transmit via more than one Relay Station, you will receive a separate Result Report.
113
13