Panasonic Panafax UF-160 - Manual (Page 50)

Cleaning the Thermal Recording Head
The thermal head in your machine needs to be cleaned periodically to ensure clear
facsimile reproduction.
To clean the thermal head,
1, Open the Receiving Unit by depressing the latch button on the right side panel.
£. Wipe the surface of the thermal head unit gently with a soft cloth or gauze soaked
with ethyl alcohol. Be sure to use a clean cloth since the thermal head can be
easily scratched.
96
I
APPENDIX
a. RELAYED (MULTI-STATION) TRANSMISSION
General Description
Relayed Transmission is a feature which can save you time and transmission costs
if you need to send the same document to several facsimile stations at the same
time. This is especially true if the transmissions are long distance.
To use Relayed Transmission, you must be part of a “Relay Network” built around
a “Relay Station.” That is, when you send a document by Relayed Transmission,
you actually send it to a Relay Station together with instructions to relay it to one
or more end receiving station(s). The Relay Station first receives the document in
its memory and then relays it to the end receiving station(s).
Example;
Initial Sending Station
RESULT REPORT
Relay Station
I-------------------
End Receiving Stations
New York Office I
Local Call
Wellington
NOT€
The number of end receiving stations that can be reached by a Relay Transmission is
limited by the memory capacity of the initial sending machine: i.e., your machine cannot
make a Relay Transmission to more than 70 end receiving stations. This is enough,
however, to allow more than one Relay Network to be set up.
97
13