Panasonic Panafax UF-160 - Manual (Page 24)

When alternative ABBR. NO. is not set.
If the number is busy, the machine will
wait three minutes and then automatically
redial the same number up to twice.
W A I T I N G T O D I A L
[ 0 7 ] ( S t a t i o n n a m e )
If no contact is made, the display will
show an information code (e.g.,
CODE = 630 indicates the line was busy).
I N C O M P L E T E
I N F O . C O D E = 6 3 0
NOT€
1. To redial a busy number, see page 47.
2. The machine does not dial the alternative ABBR. No. when the document is sent by
Relayed Transmission.
3. If you hear a voice speaking through the speaker, pick up the handset to talk to the
other party.
44
Abbreviated Dialing
1 Place a document face down on the ADF.
Adjust left and right Document Guides.
DOCUMENT SET
Document Guide
The display will show the two-digit code
and station name. The full number (e.g.
555 1234) will then be dialed and shown
on the display.
If the number dialed answers, document
transmission will start. If the other station
has an ID, it wilt appear on the display.
When transmission ends, the display will
show the number of pages sent.
When alternative ABBR. NO. is set.
If the number is busy, the machine will
automatically dial the alternative ABBR.
NO. which you have already recorded.
Ex: (See page 24.)
If the alternative number is also busy, the
machine will wait three minutes and then
automatically redial the 1st number and
alternative number up to twice in the
same way.
* D I A L I N G ♦
[ 3 0 ] ( S t a t i o n n a m e )
* D I A L I N G *
5 5 5 1 2 3 4
O N L I N E
I D :
* X M T *
COMPLETED
TOTAL P A G E S = 0 5
* D I A L I N G ♦
[ 3 1 ] ( S t a t i o n n a m e )
W A I T I N G T O
[ 3 0 ] ( S t a t
D I A L
o n n a m e )
45
i