Panasonic Panafax UF-160 - Manual (Page 13)

How to Set Your ID Number
When you transmit, your fD will appear on the other person’s display. When you
receive documents, the sender’s ID will appear on your display. We suggest you use
your facsimile telephone number as your ID, but you may use any number up to 20
digits long.
If you have just set your LOGO and pressed I ST ART | , skip to step 4. If not,
start from Step 1.
1
and
SET MODE
NO. =1
USER PARAMETERS
and or
ID NO.
repeatedly.
Enter the ID digits. Use 1 SPACE 1 to
enter a space. If you try to enter more
than 20 digits you will hear a pip-pip-pip
sound. ID NO.
212 111 123
Ex: 1 SPACE 1
# ace T lir^lT 4
ШШ
START
To set the ID,
POLLING PASSWORD
nil
Now you can go on and set the POLLING I oi , dec - i 990 i 5 ■ 00
PASSWORD (see page 53), or return to
standby with I STOP
NOTC
To erase the number you just entered, press I CLEAR
22
ONE-TOUCH/ABBREVIATEO NUMBERS
Entering One-Touch/Abbreviated Dialing Numbers
One-Touch Dialing and Abbreviated Dialing are two fast ways of dialing full numbers.
To use these dialing methods, you must first enter the full numbers using the following
procedure.
1
and
SET MODE
NO. =1
ONE -TOUCH/ABBR.NOS
ONE-TOUCH/ABBR.
4o
4b
To assign a One-Touch number, press
one One-Touch key.
Ex: F ot I
To assign an Abbreviated number, press
f ABB
r I and two keys on the keypad
07] TELEPHONE NO
to enter any code from 01 to 70.
Ex: iABBRir^iyj
Enter facsimile telephone number (up to
36 digits) including pauses and spaces.
Ex: I PAUSE Ifslfnisll SPACE im
IIO l JE]
62] TELEPHONE NO
[ 0 7 ] TELEPHONE
9 - 5 5 5 1234|
NO,
NOTC
1. If you a special access number to get an outside line, enter it first and then press
I PAUSE I. A hyphen is displayed for pause.
2. Use I SPACE I to enter a space between the numbers to make it easier to read.
3. When you input a wrong number in step 5, press | CLEAR I to erase the number
............................................................
23
jwu iJi^uk «« nivriy IIUIIIWV» III iJf piVM |VLJCMnj lU OfCHW
before the cursor, then reenter the right number and press fsTART [.
i