Panasonic Panafax UF-160 - Manual (Page 25)

46
When alternative ABBR. NO. is not set.
If the number is busy, the machine will
wait three minutes and then automatically
redial the same number up to twice.
W A I T I N G T O D I A L
| 3 0 ] ( S t a t i o n n a m e )
If no contact is made, the display will
show an information code (e.g.,
CODE = 630 indicates the line was busy).
NCOMPLETE
I N F O , C O D E = 6 3 0
NOTC
1. To redial a busy number, see page 47.
2. The machine does not dial the alternative ABBR. No when the document is sent
by Relayed Transmission.
3. If you hear a voice speaking through the speaker, pick up the handset and then
press [ stop I to talk to the other party.
Redialing
If the number you dialed is busy or there is no
answer, your machine will wait three minutes and
then automatically redial the number for you up
to twice.
If no contact is made, the display will show an
information code.
In this case, you can redial the last number (e.g.
07) by simply pressing | REDIAL I.
You can use Redial after dialing a number using
one of the following.
One-Touch dialing
Abbreviated dialing
Direct dialing from the keypad
Redialing
Your machine will redial the last number a total
of three times.
Even if you make contact and succeed in sending
your documents, you can still use
I REDIAL I to
contact the same number again.
* D I A L I N G +
[ 0 7 ] ( S t a i i o n n a m e )
47
mill I i