Panasonic DVD-P10D - Manual (Page 18)

Connection
• Ensure that the power of the player and other equipment to be connected is turned off be­
fore commencing connection.
• Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and video cables.
•Select the appropriate screen type at the initial setting “5 TV Aspect” according to your
TV set (4:3 or 16:9). (See page 59.)
Connecting to a stereo TV iset
• During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc. H this is the
case, adjust the volume to the desired level.
• If the player is connected to the TV through a video cassette recorder, the picture may not be played
back normally with some DVDs. If this is the case, do not connect the player via the VCR.
TV set
^^VCR
This player
18
M When connecting this player to a TV set equipped with an S-video input connector
The S (separate) video output connector separates the color (C) and luminance (Y) signals before
transmitting them to the TV set in order to achieve a sharper picture. Use the S-video cable (optional)
when connecting the player to a TV set equipped with an S-video input connector for the best picture
clarity possible. When using the S-video cable, the yellow composite video plug need not be connect­
ed to the TV.